DIG B37-700B 1/2 in. (0.600 in. I.D. x 0.700 in. O.D.) x 500 ft. Brown Blank Poly Tubing for Drip Irrigation

DIG B37-700B 1/2 in. (0.600 in. I.D. x 0.700 in. O.D.) x 500 ft. Brown Blank Poly Tubing for Drip Irrigation

Made with premium quality polyethylene resins, DIG’s 0.700 in. O.D. brown blank poly tubing for drip irrigation is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. The brown drip tubing, commonly referred to as poly tubing, blank tubing, or drip hose, is used as the primary supply line of a drip irrigation system into which drip line, micro line or drip emitters are connected to deliver water to the plant area. DIG’s drip irrigation brown poly tubing has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life. Used as the primary supply line in a drip irrigation system into which micro tubing, micro line, drip emitters or drip line are connected. Used with B12100, B18100, B18250 and B18500 PC dripline.

• Produced Dow’s 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• Color: brown
• Use with DIG’s black compression fittings, 17 mm barbed fittings and nut lock fittings
• Dimensions: 500 ft. with 0.600 in. I.D. x 0.700 in. O.D.
• Bending radius: 1 ft.
• Maximum operating pressure: 60 psi
• Can be installed above or below ground
• DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
• Resistant to cracking, heat, UV rays and chemicals
• Designed to meet the demand of any drip irrigation projects from professional landscape to residential gardening installations, for above or below the ground

Dimensions

Details

Additional Resources