TEKTON Locking Pliers Set, 6-Piece (Straight Jaw, Curved Jaw, Long Nose) | PLK99903

TEKTON Locking Pliers Set, 6-Piece (Straight Jaw, Curved Jaw, Long Nose) | PLK99903

Straight Jaw Pliers: Straight in profile, these wide and relatively short jaws are designed to clamp and hold flat stock, L-angle, and sheet metal in position for welding or assembly. Curved Jaw Pliers: Designed for versatility, the profile of these jaws is a combination of an irregular curve and a straight tip. The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive, nonslip bite of deep, sharp teeth. The straight tip clamps and holds flat stock, L-angle, and sheet metal with shallow, closely spaced teeth that offer an evenly distributed grip. Long Nose Jaws: Tapered along its full length and width to a relatively fine tip, the profile of these jaws is a combination of a long, narrow, straight section and a shallow, irregular curve at the base. When positioning and clamping parts for welding or assembly, getting everything lined up perfectly and held in place can be frustrating. To make it easier and faster, our locking pliers are designed with a pull-type release lever that allows you to clamp, release, reposition, and clamp again with one hand, unlike a traditional pinch-type release lever that requires different hand positions (and often two hands) to lock and to release.

• Includes 2-pc. straight jaw locking pliers: 5, 10 in.; 2-pc. curved jaw locking pliers: 5, 10 in.; 2-pc. long nose locking pliers: 6, 9 in.
• Straight jaw pliers clamp flat stock, L-angle, and sheet metal for welding or assembly
• Curved jaw pliers with straight tips grip round, square, and hex shapes, flat stock, and sheet materials
• Long nose pliers reach into narrow spaces to hold thin flat stock and sheet metal in position
• Pull-type release lever works like a trigger for controlled one-handed operation and fast repositioning

Product information

Technical Details